Post-construction cleaning services

The purpose of the Rough Clean Phase is to remove a bulk of the construction debris and prepare the site for further cleaning.

 The Rough Clean Phase includes the following:

• Removal of large items items such as debris, trash, leftover materials and other items that cannot be vacuumed. Removal of protective coverings and stickers from floors, windows and other surfaces. 
• Dusting including high dusting of ceilings, light fixtures and ceiling fans. All surfaces including walls, baseboards and ledges, windowsills, door frames and trim are dusted as well. 
• Vacuuming of all carpeted areas is done using a HEPA filter to minimize airborne dust.
• Floor cleaning including sweeping and mopping of all floors. Buffing and polishing floors will be completed if needed. 
• Window and glass cleaning involves cleaning of all windows inside and out. Mirrors and glass fixtures are cleaned. 

 The purpose of the Light/Detailed Clean Phase is to focus on the detailed cleaning of the interior spaces. 

The Light Clean (or Detailed Clean) Phase includes the following: 

• Wipe inside and out of cabinets and drawers and clean cabinet hardware.
• Clean and disinfect countertops.
• Wipe down backsplashes.
• Clean interior and exterior of all appliances.
• Ensure appliances are free of construction dust and debris.
• Scrub and polish kitchen sinks.
• Clean and disinfect faucets.
• Clean tiles and grout in showers, bathtubs and floors.
• Clean and polish all bathroom fixtures.
• Clean and disinfect toilets inside and out.
• Clean and polish bathtubs and shower enclosures.
• Ensure all caulking is free of debris and in good condition.
• Clean vanity tops and mirrors.
• Wipe down inside and outside of cabinets and drawers.
• Clean and dust all light fixtures.
• Ensure all light bulbs are functioning.
• Dust and clean closet shelves, rods and floors.

 The purpose of the Final (Touch-Up) Clean is to ensure that the site is ready for occupancy and addresses any remaining construction dust and minor debris.

The Final (Touch-Up) Clean Phase includes the following:

• Wipe down all doors, door frames, and handles
• Ensure no paint or construction debris is left on all surfaces.
• Clean all air vents and replace filters if necessary.
• Dust and vacuum around HVAC registers and grilles.
• Inspect all cleaned areas to ensure spots are missed. 
• Check for any leftover construction materials or debris.
• Use air purifiers or fresheners to eliminate any residual construction smells.
• A final walkthrough is conducted with the client to ensure satisfaction.